Laguna Tools MTP105, Руководство пользователя

Страница: 36 / 69

36
Applying the spindle break block
will help remove any backlash in the
system and improve the finish of the
cut. Do not over tighten as the block
is meant to exert light pressure. If
you over tighten the block you will
not be able to move the saddle along
the bed and will be putting extra
strain on the system.
Note. Never place your fingers between
the gears as they could crush your finger .
Note . It is recommended that you use a router for cutting flutes, as drills are not
designed to take side ways pressure and the bearings could ware out with prolonged
use.
Note. You can use the copy function while cutting flutes both spiral and straight.
There are certain limitations when cutting radiuses which will depend on the design of
the job.
Note. Use the bed stops to control the length of the flute.
Spindle break
Un safe