Laguna Tools METAL PRO Series, Руководство пользователя

Страница: 28 / 66

28
is excessive or the sanding belt runs off center,
the sanding belt will hit one of the two ceramic
rollers (
2 ). The rollers are attached to micro
switches that stop the machine. The sensitivity
of the non-contact air sensor can be adjusted
by rotating the control knob (
5 ]) This has been
factory set and should not need adjustment.
The speed of the belt oscillation can be
increased or decreased by adjusting the control
knob (
6 ).
The sanding belt is centralized on the rollers by
adjusting the sanding belt centralizing cam.
This will have to be done for every belt, as each
belt will run differently.
Control panel functions
1. DRO/Thickness display
2. Thickness Control pad
3. Sanding belt start button.
4. Conveyor belt start button.
5. Power on light.
6. Amp Meter
7. Sanding belt stop button.
8. Conveyor belt stop button.
9. Emergency STOP button ( twist to release ).
Sanding belt
centralizing cam
1
2
3
4
5
6
7
8
9