Laguna Tools METAL PRO Series, Руководство пользователя

Страница: 18 / 66

18
INSTALLING ABRASIVE BELT
Note. Disconnect the sander from the electrical supply.
Abrasive Belt tension switch Abrasive sanding belt installation
1. Disconnect power to machine. Rotate the roller tension switch
counterclockwise to lower the tension roller.
2 Rotate the clamp counterclockwise and lift it out.
Note. The clamp is a quick-release and needs only to be rotated
approximately 90 degrees to release.
3. Remove the spacer. This will allow access for the sanding belt.
4. Slide the sanding belt onto the top and bottom rollers.
Note. Ensure that the direction arrows on the inside of the sanding belt are
facing in the correct direction (clockwise). If the belt is assembled with the
arrows in the incorrect direction, the belt will not track properly and/or
break.
5. Replace the spacer and clamp.
6. Rotate the roller tension switch clockwise to raise tension roller.
Clamp & Spacer