Dake Corporation
1809 Industrial Park Dr.
Grand Haven, MI 49417
974315
9
REV112019
ASSEMBLING THE MACHINE
*picture may vary by model*
Fit the components supplied as indicated in the above diagram:
Part 1:
Screw the trigger handle into the head (main casting) and use the provided nut to tighten
it firmly in place as shown in the picture.
Part 2:
Screw the cut length stop rod into the right-hand side of the vise casting as shown in the
picture, use the provided nut to tighten firmly in place.
Part 3:
Attach and align the work support bracket on the left-hand side of the saw base using
the two bolts provided
CHOOSING A BLADE
The saw will come with a “DAKE Saw Pitch Calculator” to assist in blade selection.
First the pitch of the teeth must be chosen, suitable for the material to be cut, according to these
criteria:
•
Parts with a thing and/or variable section such as profiles, pipes, and plates, need fine
toothing, so the number of teeth used simulations cut.
•
Parts with solids sections need wide spread toothing penetration.
•
Material made of soft plastic, light alloys and mild bronze also require coarse toothing.
•
If still unsure what blade to purchase contact your blade provider or DAKE.
