16. Showers
Your yacht has a hot & cold, fresh-water shower in each head and on the
transom.
If the engine has been running, the hot water can be very hot – be cautious!
In order to use the showers, the fresh-water pump must be activated on the
12V panel.
To operate the shower-drain pumps ensure the “confort” switch is on; this is
located on the 12v panel. The shower drains are operated by float switches
which will automatically start to pump when water enters the drain.
Transom Shower
The valves below the shower head will switch the water on and also control
the temperature of the water. The red valve controls the hot water and the
blue valve the cold water.
To use the shower head simply pull it out and press the button on the back.
If no water comes out make sure that the 12V water switch is on, that the
shower hose is not kinked and that valves are open sufficiently.
Water flow and
temperature
control switches
Shower head
