7. Air conditioning
The air conditioning unit will operate when the vessel is plugged in to shore
power and when the generator is running. Each cabin has its own individual
air con unit and there is a 4
th
unit located in the saloon.
Operate the air conditioning as
follows:
•
Make sure the units are switched
on at the 110v panel A. The air
conditioning pump should be
switched on first.
•
Switch on the unit using the
mode button
•
Select “cool” via the mode
button
•
Select your base temperature
using the + - temperature controls
•
Select fan strength using the fan speed control
•
To switch the units off press the mode button repeatedly (4 times to run
through all the modes) until “off” is selected.
Load up the generator with one air conditioning unit every two minutes so
that the generator does not overload.
Bleed valves for the air conditioning units.
There are bleed valves fitted to each unit in case the
system becomes air locked. If this occurs simply open
up the bleed valve until the air is dispelled and water
starts to come out of the valve. Close the valve and
start up the unit.
The valves are situated beneath the floorboards in the following locations:
Stateroom: before the shower room and central cabin floor
Port hull: beneath steps
