Lagler ELF, Руководство по эксплуатации

Страница: 44 / 77

ELF 01.10.2019
English / Englisch
MAINTENANCE WORK AND REPLACEMENT OF WEARING PARTS
7.3 CHECKING THE MACHINE SETTING
ATTENTION!
The best working result is achieved when the abrasive
sands centrally! Only with this setting is it possible to avoid
the abrasive from sanding too deep on one side, resulting in
unwanted sanding marks!
From time to time, or as a result of incorrect transportation, it is
possible for the machine to become incorrectly adjusted. Incorrect
adjustment is indicated by one-sided sanding of the sanding drum,
which can lead to sanding tracks and complaints. Correction of
machine setting is performed as follows:
1 Lift the sanding drum off the floor by turning the lowering
lever at the handle upwards (fig. 68).
2 Switch off the machine and pull the power plug out of the
socket!
3 Tilt the machine backwards over the safety guards (fig. 69)
so that you can see the wheel bearings and place it down
carefully on the floor (fig. 70). Ensure that the machine is
standing securely!
4 The wheel on the belt guard side can be adjusted by releasing
the tension screw. The other wheel is firmly fixed using a
screw.
7
Fig. 68 Lift the sanding drum off the floor by turning the
lowering lever at the handle upwards.
Fig. 69 Pull the power plug out of the socket and tilt the
machine backwards over the safety guards.
Fig. 70 Place the machine carefully on the floor. Ensure
that the machine is standing securely!
43