Lagler ELF, Руководство по эксплуатации

Страница: 10 / 77

ELF 01.10.2019
English / Englisch
RISK OF DEATH from electrical shock:
• The motor cable and the power cables must be protected
from mechanical and electrical damages in the workplace!
• Do not carry or pull by the machine by the cable! Do not pull
on the cable to remove the plug from the socket! Protect the
cables against heat, oil and sharp edges!
RISK OF DEATH and RISK OF PROPERTY DAMAGE from unsecured
load:
• When transported in a car or the like, the machines and all
parts must be secured against sliding!
RISK OF EXPLOSION due to sparks while sanding or a high dust
concentration in the air:
• Do not use the machine near
- sources of fires,
- flammable liquids or gases,
- potentially explosive areas!
• Do not smoke in a dusty environment, e.g. while sanding,
emptying the dust bag or cleaning the machine!
RISK OF FIRE from sparks while sanding or from spontaneous
combustion:
• Prior to sanding a nailed or screwed floor all nails or screws
must be countersunk deeply enough so that they cannot be
sanded:
- Countersink the nails for example with a hammer and a
punch!
- Tighten the screws!
• There is a high risk of fire when sanding woods with a large
amount of resin, oiled or waxed floors or metal! Therefore,
the machine must always be cleaned carefully directly
after sanding! Be certain to note the warning notices of the
manufacturers of paint, oil and wax!
• Cloths, pads, et cetera which have been immersed in oil or
wax can spontaneously combust! Be certain to note the
warning notices of the manufacturers of paint, oil and wax!
HAZARD WARNINGS AND SAFETY INSTRUCTIONS
2
WARNING!
9