Lafayette Accu-Rise Operating System, Руководство по установке

Страница: 10 / 16

INSTALLATION
8
Install the Shade
■
Fit the front channel on top of the headrail onto the
front lip of the installation brackets.
■
Push the headrail up and back until it snaps into
place.
■
Check to ensure the headrail is securely in the
brackets.
➤
Check that the bottom of the headrail is snapped
into the base of each bracket.
➤
Check that the front lip of each bracket is in the
front channel of the headrail.
➤
If any brackets are not installed correctly, release
the shade and reinstall. See “Removing the
Shade (If Necessary)” on page 12.
Attach Hold-Down Brackets (Optional)
Hold-down brackets provide stability and prevent swaying by securing the bottom rail (often used
in French door applications). Hold-down brackets can only be used on outside mount shades.
■
Lower the shade and place the pins from the hold-down
brackets into the bottom rail end caps.
■
On the mounting surface, mark the screw holes.
■
Drill the screw holes using a
3
/
32
" drill bit.
➤
Check that the brackets are level and aligned.
■
Attach the hold-down brackets to the mounting surface using the screws provided.
The back of the headrail
snaps into the bracket.
The front of the bracket
fits under the groove.
Headrail
Bracket
Snap
in Place
Good Bad Good Bad