laerdal SimMom, Инструкция по применению, Страница: 37 / 50

Intr
oduction
Setup
Softwar
e
Maintenance
Spar
e Par
ts
Specifications
36 37
Maintenance
Perf
orming
Sim
ulations
3. Disconnect bladder hose from inline hose connector. Ensure
hose does not fall through hole and into torso.
4. Remove bladder from pneumo pad and discard.
5. Trim new bladder tubing to match original tubing length. Connect
new bladder hose to inline hose connector.
6. Fold and insert new pneumo bladder in pneumo box.
7. Replace chest skin over torso. Secure skin at shoulder and back
tabs.
8. Conceal puncture marks on the exterior of chest skin with wax in
the Bladder Replacement Kit.
Thoracentesis Module Replacement
To replace thoracentesis module on the manikin:
1. Remove chest skin from tabs at shoulders and back.
2. Remove the thoracentesis module from the midaxillary site of
the manikin (left).
3. Insert a new thoracentesis module.
4. Replace the chest skin over the torso. Secure the skin at the
shoulders and both sides.
Abdominal Skin Replacement
SimMom is delivered with two abdominal skins: normal and C-section
deliveries.
To replace abdominal skin:
Note: Skin may have a slight oily feel which is normal and a
part of the manufacturing process.
Caution: Folding the skin downward without support
underneath it may cause the skin to tear.
Caution: Do not cut skin.
1. Detach skin from pegs on the side of the pelvis.
2. Underneath the skin, disconnect the audio jack from the pelvis.
3. Carefully unbutton the skin starting at one of the lower corners
on the pubis.
4. Remove the skin.