laerdal SimMan 3G, Руководство по обслуживанию

Страница: 10 / 16

10
During the simulation the fluid will drain into the drainage bag.
After the simulation session flush the IV Arm with air to remove any
fluid/liquid in the system. Connect a syringe filled with air to the IV
catheter, and flush the IV Arm with air until only air exits the overflow
tube.
Fluid System
After each session where the fluid system has been used, drain the
internal fluid reservoir. See: Empty Internal Fluid Reservoir
Blood System
When the day’s sessions are done, flush the Blood System with distilled
or de-ionized water, with the wounds connected. This is to remove
remains of Laerdal blood in the Blood System, and prevent clogging of
valves and tubing.
Power off the Patient Simulator and PCs
Charge batteries if necessary.
Clean the Skin
Wipe the skin with a moist cloth to remove stains. Remove wet
clothes or linens. Glue residue from the wound module tapes may be
removed with a moist cloth.