manualshive.com logo in svg

laerdal SimMan 3G PLUS, Руководство пользователя, Страница: 28 / 88

Поделиться
Скачать
laerdal SimMan 3G PLUS Скачать руководство пользователя страница 28

20-18071 

Rev A

Prepare Genitalia and Catheterization

SimMan 3G PLUS is fitted with neutral genitalia. It can be 

replaced with the supplied male or female genitalia to simulate 

catheterization. 

1.  Remove the Patient Simulator’s genitalia pad by gripping 

the pad pulling forward and down.  

2.  Select new genitalia module.
3.  Connect the new genitalia module’s urine tube and 

the catheterization sensor cable from inside the Patient 
Simulator pelvis to the urine bladder module.  

4.  Place the new genitalia module back into the Patient 

Simulator’s pelvis. 

      Notes

• 

The Patient Simulator legs do not need to be removed before 

the genitalia pad can be replaced. 

• 

Common skin preparations such as chlorhexidine and 

povidone iodine-based products may be used safely without 

staining the genitalia.  

• 

Always use a water-based lubricant liberally when inserting    

a urine catheter.  

Use the following catheter sizes
Female genitalia

Foley 14Ch and Lofric 16Ch

Male genitalia

Foley 16Ch and Lofric 16Ch

  

Содержание SimMan 3G PLUS

























































































Отзывы:

Нет отзывов