Sold & supported by
CW Laser Diode Driver for
Butterfly 14Pin Package
SmartPower XS 10-2
Made in Germany by
4-11
SmartPower XS 10-2
LaCoSys Sept 2020
Rev. A
Contents
1
Introduction ........................................................................................................................................................... 4
2
Technical Parameters ........................................................................................................................................... 5
3
Mechanical Drawing ............................................................................................................................................. 6
4
Pin & jumper description ....................................................................................................................................... 7
5
Laser Diode connection ........................................................................................................................................ 9
6
Getting Started .................................................................................................................................................... 10
6.1
Hardware Setup .......................................................................................................................................... 10
6.2
Start Driver and Check Temperature loop .................................................................................................. 10
6.3
Analogue Modulation .................................................................................................................................. 10
6.4
Digital Modulation ....................................................................................................................................... 10
7
Temperature Control Loop .................................................................................................................................. 10
8
Laser diode protection ........................................................................................................................................ 11
9
Over temperature Protection .............................................................................................................................. 11
10
Temperature set point (NTC-10k) diagram ......................................................................................................... 11
11
Contact ...........................................................................................................
Fehler! Textmarke nicht definiert.
1
Introduction
Thank you very much for purchasing our SmartPower Board. You have bought a high-quality advanced
product and we are sure that you will enjoy the work with it.
Please read this operation manual carefully before using the device and pay attention to the safety
instructions given here. In order to obtain optimum performance from your Laser Driver module follow
the installation and operating instructions.
Please note that any unauthorized soldering cancels the one year warranty.
OEM-products are not EMC and CE proven!
If you should have any questions or problems, please contact our service staff.
Содержание SmartPower XS 10-2
Страница 1: ......
