LaCoSys SmartPower XS 10-2, Руководство пользователя

Страница: 8 / 11

Sold & supported by CW Laser Diode Driver for
Butterfly 14Pin Package
SmartPower XS 10-2
Made in Germany by 8-11 SmartPower XS 10-2
LaCoSys Sept 2020
Rev. A
Connector X2 type Fischer WSL6 (PIN 1 MARKED)
PIN FUNCTION SPECIFICATION AND REMARKS
1 Temp-Monitor Normal operation 2.5V (see diagram chapter 9)
2 External Set point
Laser Current
(option via Jumper)
0...2V 1V/1A (input Impedance = 10kΩ)
[please contact default: disabled]
3 Monitor Laser
Current
Analog Voltage 0...2V 1V/1A (output impedance 1kΩ)
4 Enable Laser
Current
LOW signal (connect to pin 5 to start laser)
5 GND Power supply return path connected to Laser Diode Cathode (-)
6 Power Supply 7..24V max. 2.2A ripple max. +/- 20mV
(use filters to prevent reverse noise generated
from the driver board)
Current Setpiont via on board
potentiometer
Current Setpiont via external
signal source at X2
0..2V = 0..2A