WASHING THE SOLUBLES CIRCUIT
Functioning:
At the end of each soluble product dispensing
phase, the preset counter starts (from 1 to 20 minutes, OFF,
function disabled). Afterwards, the request to wash the circuit
will appear.
Please follow these instructions for the washing process:
Selection block:
If the washing cycle is
not performed within 60’ after the message
appears, with the
“block soluble circuit”
function set (YES), the machine is blocked
to prevent all soluble-based selections.
The indications above are performed in
addition to the solubles circuit washing
process described on the following page.
The washing cycle has ended
when this message appears on the
display:
Remove the washing container.
Press the key
to return to the
wash cycle screen and the
RES
(
24
)
key to return to normal work mode.
7
1
Level 1
CLEANING THE SOLUBLES CIRCUIT
(Self version: activable only if card is enabled)
1
After the machine sends the message.
2
Raise the dispensing nozzle (
1
).
1
3
Place the washing container sotto il
under the dispensing nozzle (
1
).
PRESS WASH
Group Washing
Milk Washing
Soluble Washing
Press the key
PRG
(
29
)
. The
following will appear on the display:
Press the washing key (
26
)
until the message
“PRESS WASH”
appears, as shown below:
The washing cycle starts if the key
PRG
(
29
)
is pressed when the cursor
is on the group washing line, or when the
SOLUBLE WASHING option is pressed
directly on the Touch Screen.
The message below will appear on the
display:
6
WASHING IN PROGRESS
4
5
26
29
24
WASH COMPLETED
MACHINE READY
67
English
