1
These procedures are to be performed at the end of the work
day or when the machine sends a message (see paragraph
“Customer programming – Services hour menu).
When the machine sends a message, the screen displays
"EXECUTE WASHING MILK CIRCUIT”
accompanied by an
acoustic signal.
The message and signal will continue until the procedure is
performed or up until the end of the timeout (60').
Please follow these instructions for the washing process:
MILK IS A FOOD PRODUCT THAT REQUIRES MAXIMUM
HYGIENE! NOT PERFORMING REGULAR AND DAILY
WASHING CYCLES CAUSES OCCLUSIONS, WHICH
CAN MAKE THE CIRCUIT BREAK AND CAUSE
LEAKS.
Therefore, please scrupulously follow the washing
instructions.
Level 1
MILK CIRCUIT CLEANING CYCLE
(Self version: activable only if card is enabled)
1
After the machine sends the message.
2
Raise the dispensing nozzle (
1
).
1
3
Place the washing container sotto il
under the dispensing nozzle (
1
).
PRESS WASH
Group Washing
Milk Washing
Soluble Washing
Press the key
PRG
(
29
)
. The
following will appear on the display:
Press the washing key (
26
)
until the
message
“PRESS WASH”
appears, as
shown below:
4
5
26
29
24
The washing cycle starts if the key
PRG
(
29
)
is pressed when the cursor
is on the group washing line, or when the
MILK WASHING option is pressed directly
on the Touch Screen.
The message below will appear on the
display:
6
Place approximately 0.7 liters of
cold water in a container and add a
dose of liquid detergent (see product
instructions).
Remove the intake tube from the milk
container and immerse it in the solution
(water-detergent).
8
7
START WASHING
Insert milk pipe in
the container with
water and detergent
as per instructions
65
English
