LaCinema HD Connect
Using the Remote Control
User Manual
page 14
2. Using the Remote Control
Some of the buttons of the remote control have different functions or
no function at all depending on the type of file you are viewing. This
chapter discusses the button functions for each type of file (movies,
photos and music) and battery installation.
2.1. Battery Installation
The remote control uses two AAA batteries. The batteries are not
pre-installed, so you will need to install them before you can use the
remote control.
To install the batteries:
1. Remove the battery compartment cover (
Fig. 10
).
2. Load the batteries onto the battery compartment. Position the
batteries so that the “+” symbols on the batteries face the same
direction as the “+” symbols on the battery compartment.
3. Slide the battery compartment cover back into the remote.
IMPORTANT INFO:
If you will not be using the remote control
for an extended period of time, LaCie recommends that you remove
the batteries.
IMPORTANT INFO:
The remote control must be pointed at the
infrared receiver on the LaCinema HD Connect (
Fig. 11
) no further
away than of 23 feet (7 meters).
IMPORTANT INFO:
When replacing batteries, please do not dis-
pose of the used batteries with your normal household waste. Dis-
pose of them by handing them over to a designed collection point
for the recycling of waste electrical and electronic equipment.
Fig. 10
Fig. 11
Remote control receiver
