6. Wait until the duplication process is finished. When duplication has finished, the Dupli 125
will beep repeatedly to show the process has been successful and the following screen will
display:
7. Open the front door (if necessary) and press the
Yes
button. The CD-RW drives will eject
the target discs.
When the process is complete, the unit will automatically return to the
Copy Start
menu.
4.2.2 Copying a master CD to target CDs with Verify and Read Check options
1. With your Dupli 125 turned on, go to the
Copy Start
screen:
2. Push the DVD-ROM drive’s load/ eject button to open the disc tray and insert the master
disc. Push the load/eject button again to close the tray.
3. Push the CD-RW drives’ load/ eject buttons to open the disc trays and insert the target
discs. Push the load/eject buttons again to close the trays. Wait until both the master and
target discs have been initialized (when the drives’ LEDs stop blinking).
4. From the
Copy Start
screen, press the
No
button three times until you come to the
Setup
screen:
5. Press the
Yes
button once. You will arrive at the
Mode Select
screen:
PROCESS COMPLETE
EJECT: PRESS YES
COPY START ?
(CDtoCD)
SETUP ?
(MODE CHANGE)
Содержание Dupli 125
Страница 1: ...LaCie Dupli 125 User s Manual ...
Страница 45: ...11 6 Write speed menu WRITE SPEED FAST YES NO COPY START CDtoCD FAST NO MEDIUM NO SLOW NO EXIT ...
Страница 46: ...11 7 Session mode menu SESSION MODE AUTO YES NO COPY START CDtoCD AUTO NO CLOSE NO OPEN NO EXIT ...
Страница 50: ...NOTES ...
