INSTALLER’S MANUAL
INSTALLER’S MANUAL
6
ADJUSTMENT OF THE HOB BURNER
2
Through the hole in the table, remove the locknut from the adjusting
spigot of the air ring using a 7 mm spanner 7.
► When there is lack of air, turn the adjusting spigot clockwise to
increase the opening of the air ring.
► When there is excess of air, turn the adjusting spigot anticlockwise
to reduce the opening of the air ring.
3
Replace and tighten lightly the lock nut.
4
Once the adjustment completed, replace the burner body and cap
and run a new test.
ADJUSTMENT OF THE FLAME SAFETY THERMOCOUPLE
:
After the adjustment, when turning on a burner, if it goes off after having
kept the control knob pushed down for 20 seconds and then releasing,
check that :
- The tip of the thermocouple is well covered by the flame and does not
touch the burner;
- The thermocouples and magnetic heads are clean.
- The magnetic head is tightened correctly (moderate torque).
PRIMARY AIR ADJUSTMENT
:
The adjustment of the primary air (air-gas mixture) is done by adjusting the air ring located in the base
of the burner, under the table. The mixture is correct when the flame is stable with blue cones.
A soft flame with yellow tips is the result of lack of air.
A flame whose base is separated from the burner cap is the result of
excessive air.
CAUTION: The adjustment of the air ring is done with the burner off.
To avoid all risks of burns, ensure that all components likely
to be handled manually (pan stands, burner caps...) and other
elements in the working area are not hot.
1
Remove the pan stands and the solid top (for “Tradition” appliances);
then remove the caps and bodies of the burners.
Multicooker
Chargrill
Electric fryer
Gas burners
Induction
Ceramic Hob
Plancha
Содержание LAG 010 UR
Страница 10: ......