background image

1     2

L     N

1 2 3 4

5 6

A

B

S1

X

230 V 3 ~ 50 Hz

L1

L2

L3

1

2

3

4

5

220-240 V 1N ~ 50 Hz

N

L

1

2

3

4

5

400 V 3N ~ 50 Hz

L1

N

L2 L3

1

2

3

4

5

L N

1

2

220-240 V 1N ~ 50 Hz

INSTALLER’S MANUAL

INSTALLER’S MANUAL

7

ELECTRICAL POWER CONNECTION

WIRING DIAGRAM

The installation must be carried out in accordance with recognised best practices, the instructions  

given in this manual and the regulations in force in the country of installation.

The means for disconnection must be provided in fixed installations in accordance with all relevant 

regulations.

BEFORE CONNECTION

:

Check that:

 The mains supply is compatible with the voltage and power of the appliance.

 The user’s fixed installation features an approved main isolating device acting on all phases.

CONNECTION

:

-  Use  a  standard  flexible  cable  (245  IEC  57  or  245  IEC  66,  or  any  other  cable  with  the  same 

characteristics).

- The power supply cables between the isolating traction device and the terminals must be of such 

lengths as to ensure in the event of traction that the live cables become taut before the earth cable.

- If the appliance is permanently connected to a fixed electrical installation, this installation must be 

fitted with a suitable leakage current protection device.

- If the appliance is connected with a cable fitted with a plug, the socket must be accessible at all 

times.

1

 

Remove the cover(s) from the back of the appliance identified by the 
label

.

2

 

Pass the lead through the grommet.

3

 

Connect a standard cable suitable for the voltage to the terminals. 

(Ensure that the jumper connectors are correctly fitted).

4

 

Set each wire one by one in the power strip and if necessary set the 

shunt clips. 

 

Tighten each plug separately to the maximum.

5

 

 Secure the cable with the cable clampe.

 It is dangerous to operate the appliance without having it properly 

earthed.

We cannot be held responsible for accidents due to missing or incorrect earth connection.

Note: Ignition controller terminal lugs not in use are to be grounded.

EN 

10-2016

Multicooker

Chargrill

Electric fryer

Gas burners

Induction

Ceramic Hob

Plancha

Содержание LAG 010 UR











Отзывы: