Labwit ZWY-111B, Руководство пользователя

Страница: 3 / 24

0
Danger!
Warnings against injury and damage.
1. The electrical supply circuit to the incubator must confirm to all national and local electric codes.
Check the serial-data plate for voltage, cycle, phase and amperage requirements before you connect
the unit.
2. Only use grounded power source (outlet) to avoid an electric shock or fire, and it is recommended
that the equipment has an unobstructed access to a dedicated power source.
3. In case of a problem, do not attempt to repair the product yourself. Do not open the power box to
avoid electric shocks.
4. Do not pull out the plug when the unit is in use. Never drag on the wire to unplug the unit.
5. This equipment can sustain a maximum of
±
10% nominal voltage fluctuation; Otherwise a power
stabilizer is needed.
6. A surge protector is recommended to avoid power-related faults.
7. In case of malfunction or burning smell, the unit must be unplugged immediately. Use a circuit
breaker to cut off the power supply. Continuance of abnormal state will result in fire caused by
overheating.
8. The electric power supply must be cut off in following situations:
8.1.-When opening the door of electrical power box without cutting off power supply might result in
electric shock.
8.2.-When replacing the fuse. Replacing the fuse without cutting off the power supply will probably
result in electric shock.
8.3.-When a malfunction occurs, mishandling will result in further damage of the equipment or
accidental injury to the user(s).
8.4.-If you do not use the unit for a long period of time.
9. Never touch the glass door and/or inner chamber when the incubator is hot.
Safety instruction!
Please be sure to follow the instructions, which are
important to your safety.