I
NSTALLATION
R
EQUIREMENTS
FOR
THE
R
APIDS
™ W
ATER
P
URIFICATION
S
YSTEM
Feed Water Requirements
Type of Feed water
Tap (TDS 100-300 ppm), RO, DI, Distilled
Inlet Water Pressure
15 PSI Minimum, 100 PSI Maximum
Inlet Water Temperature
4°C to 38°C (40°F to 100°F)
TOC
< 1.0 ppm
Total Silica
< 1.0 ppm
Turbidity
1.0 NTU Max
*System’s capacity will be lower with tap water feed due to the amount of dissolved solids in the tap water. Recommended for
low usage only.
Feed water Connection Needed
Feed water Piping Connection
Fitting capable of accepting a 3/8" OD tube
Environmental Requirements—INDOOR USE ONLY
Operating
5°C to 40°C (41° to 104°F);
Relative Humidity 20% to 80 % non-condensing in-
stallation.
Pollution Degree 2 in accordance with IEC 60664.
Altitude Limit 6562 ft. (2000meters).
Storage
5°C to 40°C (41°F to 104°F)
10% to 85 % relative humidity / non-condensing
Power Requirements
Power source
Rated at minimum of 15 amps at 120 volts.
Page 30
Table 4.1
LT0033-4
