S
YSTEM
M
AINTENANCE
EXHAUSTED CARTRIGE REPLACEMENT (CONT.)
STEP 18|
Install the tubing and fittings to the top of cartridges and press the NEXT button.
STEP 19|
Install the remaining three cartridges in the proper order. Press the NEXT button.
STEP 20|
Make sure the bottom tubing and fittings are properly installed. Press the NEXT button.
STEP 21|
Once the cartridges are properly installed and the drain tube is installed at the dispenser port, turn
on the inlet water valve then press the PURGE AIR button.
STEP 22|
Once the air purge is completed, install the 0.2 Micron Final Filter and press the NEXT button.
STEP 23|
Replace the cover then press the NEXT button.
STEP 24|
Once cartridge replacement is complete, press the DONE button.
STEP 25|
The main display screen will then appear, On / Off or Standby. Press the ON button to start the
Rapids™ system in the normal operation.
STEP 26|
Press the STANDBY button to place the unit in the standby mode.
STEP 27|
The standby mode will not have any components energized in this sequence, other than the
microprocessor.
Page 47
LabStrong™ Cop.
