LABSTAC MSC41-060ST, Руководство по эксплуатации

Страница: 9 / 17

4 4-5 -5 Adjust the interpupillary distance
Adjust the prism housing along the direction of arrow of the
.4 .
Fig till the observation is comfortable
. 5
Fig
4 4-6 -6 Use eyepiece shields
1) , -
For user who does not wear glasses hold the diopter
adjusting ring to prevent them from rotating and turn the
.
eyepiece till the eyepiece shield fit the observer well
2) ,
For user who wears glasses take the eyepiece shields off
.
before observation
. 6
Fig
4-7 7 Install and remove the optional eyepiece micrometer
1) ② .
Turn and remove the mounting ring from the eyepiece
( .5)
Fig
2) ①,
Clean the eyepiece micrometer and mount it to the
.
mounting ring with the inscription side downward
3)
Gently twist the mounting ring with the eyepiece
② .
micrometer into the eyepiece till tightening securely
4) ,
To remove the eyepiece micrometer take down the
,
mounting ring by twisting and take out of the micrometer
.
and the wrap it in clean soft paper for storage
. 7
Fig
4-8 4-8 Install the illumination device
1) ①
Insert the illumination device in the bracket with the
- ② -
protrudent side toward the lock screw and tighten the lock
.( .6)
screw Fig
2)
Put the plug into the socket of the pillar stand
. 8
Fig
9
STEREO ZOOM MICROSCOPE
www.labstac.com