LabRepCo GM-ULT-1786, Руководство пользователя

Страница: 8 / 22

7
Part number 21729, Rev 4
3. Press BACK to return to the system level menu.
Once you have activated PASSWRD SECURITY ON, the following
window will appear when an operator requests access to any menu
except the RUN menu:
Changing the password
The password (access code) is only required when the security
setting is ON.
1. Navigate to the SETTINGS mode line, and press ENTER
2 Scroll to the SET ACC CODE, and press ENTER
3. Set the access code by using the UP and DOWN keys to change
the value of each digit, and using the ENTER key to move to the
next value. You may also use the BACK key to move back through
the digits.
SECURITY ACCESS REQD
ENTER ACC CODE
ACC CODE= 0 0 0 0
PRESS ENTER FOR NEXT
UP
DOWN
ENTER
BACK
SYSTEM NORMAL
RUN MODE
˃
SETTINGS MODE
SETTINGS MODE
SET TIME= 00:00:00
˃
ACC CODE= 1 2 3 4
HI ALRM SET= -40
SETTINGS MODE
ADJUST
˃
ACC CODE= 1 2 3 4
USING UP & DOWN