background image

20 

 

Part number 21729, Rev 4 

 

NO CONSEQUENTIAL DAMAGES.

  LabRepCo, LLC is not responsible for economic loss; profit loss; or 

special, indirect or consequential damages, including without limitation, losses or damages arising from contents 
spoilage claims whether or not on account of refrigeration failure, electrical failure, power failure, or compressor 
failure.  LABREPCO, LLC's MAXIMUM CUMULATIVE LIABILITY RELATIVE TO ALL 
CLAIMS AND LIABILITIES, INCLUDING OBLIGATIONS UNDER ANY INDEMNITY, WHETHER OR NOT 
INSURED, SHALL NOT EXCEED THE COST OF THE PRODUCT(S) GIVING RISE TO THE CLAIM OR 
LIABILITY. 

WARRANTY IS NOT TRANSFERABLE.

  This warranty is not assignable and applies only in favor of the 

original purchaser/user to whom delivered.  Any such assignment or transfer shall void the warranties herein made 
and shall void all warranties, express or implied, including any warranty of merchantability or fitness for a particular 
purpose. 

NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

  

There are no other warranties, express, implied, or statutory, except the two (2) year warranty and the additional 
three (3) year compressor warranty as described above.  These warranties are exclusive and in lieu of all other 
warranties, including implied warranty and merchantability or fitness for a particular purpose.  There are no 
warranties which extend beyond the description on the face hereof, whether based on contract, warranty, tort 
(including negligence), strict liability, indemnity, or any other legal theory, and whether arising out of warranties, 
representations, instructions, installations, or non-conformities from any cause.  Purchaser further acknowledges that 
the purchase price of the Product reflects these warranty terms and remedies. 

ALTERATION, NEGLECT, ABUSE, MISUSE, ACCIDENT, DAMAGE DURING TRANSIT OR 

INSTALLATION, FIRE, FLOOD OR OTHER EXTERNAL CAUSES.

   

LabRepCo, LLC is not responsible for the repair or replacement of any parts that LabRepCo, LLC 
determines have been subjected after the date of manufacture to alteration, neglect, abuse, misuse, accident, damage 
during transit or installation, fire, flood or other external causes.  It does not apply to defects resulting from failure to 
properly install, operate or maintain the product in accordance with the printed instructions provided, or damage 
caused by the storage of any corrosive material that comes in contact with the interior or exterior portions of the 
cabinet, or the use of spark producing equipment or containers (such as galvanized or carbonized steel containers) 
that come in contact with any interior portion of the cabinet. 

OUTSIDE U.S./CANADA.

  This warranty does not apply to, and LabRepCo, LLC is not responsible for, any 

warranty claims made on products sold or used outside the United States and Canada. 

CHOICE OF LAW/VENUE.  

The laws of the State of South Carolina shall govern the validity, interpretation and 

enforcement of this warranty, regardless of conflicts of law principles.  Purchaser agrees that proper venue for any 
action to enforce the terms of this warranty shall be the Dorchester County District Courts, South Carolina.  
Purchaser submits the jurisdiction of such courts over the Purchaser and the subject matter of any such action.  Any 
action for breach of these warranty provisions must be commenced within one (1) year after that cause of action has 
accrued. 

WARRANTY CLAIMS.

  To obtain prompt warranty service, simply contact the manufacturer at 800-648-4041.  

LabRepCo, LLC’s

 

shipping records showing date of shipment shall be conclusive in establishing the warranty 

period.  All claims should include:  model number of the refrigerator, the serial number of the cabinet, proof of 
purchase, date of installation, and all pertinent information supporting the existence of the alleged defect.  Any 
repairs must be authorized by LabRepCo, LLC in order for the warranty to be honored. 

Содержание GM-ULT-1786























Отзывы: