Labounty MRX Series, Безопасность, эксплуатация и обслуживание

Страница: 20 / 36

20 | MRX Multi-kit Demolition Tool Operation & Maintenance Manual
40 HOUR INSPECTION CHECKLIST
Inspect Hardware
_______ Check the play between the pins and bushings on the rotating head. If the play is greater than 0.6 mm, replace
the bushings and pins.
Lubrication
_______ Grease the pinion and teeth of the rotation bearing (See “MRX Body Grease Fittings” on page 21).
Blade / Teeth Maintenance
_______ Measure the play between the blades. Ensure the play is between 0.2 - 1.2 mm. If the play is greater, shim the
blades (see “Blade Maintenance” on page 23).
Inspected By: _______________________________________________ Date:_____________________
6 MONTH INSPECTION CHECKLIST
_______ Inspect the gaskets on the rotation thrust block.
Inspected By: _______________________________________________ Date:_____________________
12 MONTH INSPECTION CHECKLIST
_______ Visually inspect the cylinder. Ensure there is no oil leakage.
Inspected By: _______________________________________________ Date:_____________________