Labounty MRX Series, Безопасность, эксплуатация и обслуживание

Страница: 19 / 36

MRX Multi-kit Demolition Tool Operation & Maintenance Manual | 19
MAINTENANCE
8 HOURS INSPECTION CHECKLIST
Lubrication
_______ Lubricate as shown on page 21.
_______ Inspect the grease fittings and replace if damaged.
Inspect Hardware
_______ Inspect the locking screw on the hydraulic lock. Ensure it is properly torqued and is not damaged (See “Jaw
Installation” on page 10).
_______ Inspect all hardware on the attachment. Ensure they are properly torqued and are not damaged (See “Inspect /
Torque Bolts” on page 23).
_______ Inspect the teeth and blade bolts. Ensure they are properly torqued and are not damaged (See “Inspect / Torque
Bolts” on page 23).
Inspect Blades
_______ Inspect blade wear. Rotate or replace if rounded more than 0.25” (See “Blade Maintenance” on page 23).
Inspected By: _______________________________________________ Date:_____________________
DAILY INSPECTION CHECKLIST
Visual Inspection
_______ Ensure the identification plate is present and legible. Replace if necessary.
_______ Inspect all tool decals and ensure they are legible. Replace if missing or illegible. Contact LaBounty customer
service for replacements.
_______ Visually inspect the structure of the attachment for damage. If damage is found, do not use the attachment and
repair immediately.
_______ Inspect all welds and ensure there are no cracks or damage. If damage is found, do not use the attachment and
repair immediately.
_______ Visually inspect all hydraulic hoses and connections. Ensure they are not damaged.
Inspect Hardware
_______ Check the play between the pins and bushings on the attachment bracket. If the play is greater than 0.6 mm,
replace the bushings and pins.
_______ Check all hydraulic connection hardware. Ensure they are properly torqued and are not damaged (see “Inspect /
Torque Bolts” on page 23).
Inspected By: _______________________________________________ Date:_____________________