Labounty MRX Series, Безопасность, эксплуатация и обслуживание

Страница: 10 / 36

10 | MRX Multi-kit Demolition Tool Operation & Maintenance Manual
Do not check for hydraulic leaks with your hands. Hydraulic oil
could inject into the skin. Seek immediate medical attention if
an injection injury occurs.
6. Visually check for hydraulic oil leaks or hydraulic hose interference.
Note: The hydraulic circuit must be bled before putting the attachment into service (see “Bleed the Attachment
Hydraulic Circuit” on page 17).
ADJUST ROTATION FLOW
MRX has two rotation flow controls, one accessed from the rotating head cover and another accessed from the top of
the attachment.
1. Remove the cover from the rotating head. The flow control port will be attached to the port block.
• Turn the rotation flow control knob clockwise to increase flow.
• Turn the rotation flow control knob counter clockwise to decrease flow.
COVER
Look through the top of the mounting bracket. The flow control will be attached to the port block.
• Turn the rotation flow control knob clockwise to increase flow.
• Turn the rotation flow control knob counter clockwise to decrease flow.
JAW INSTALLATION
MRX is shipped without the jaw installed. Follow the instructions below to install the jaw.