Labomed PRIMA ENT, Руководство пользователя

Страница: 18 / 40

18
Prima ENT/DNT
CONTROL ELEMENTS
9
1. ON/OFF Switch (see 2 in Fig. 7)
The ON/OFF switch is located at the back of the swivel
arm. In the ON position, a green LED glows, and the
cooling fan starts running. Set the intensity control knob
at the minimum intensity level before switching the
system on.
To preserve the life of the LED, turn off the instrument
when the microscope is not in use.
2. Intensity Control Knob
This knob is located at the front of the suspension arm
(see A in Fig. 10). The brightness of the field of view can
be adjusted as desired using the intensity control knob.
3. Swivel Arm Locking Knob
This knob (see B in Fig. 10) locks the movement of the
swivel arm at the desired position by turning it clockwise.
4. Brakes
Lock the stand to prevent unwanted movement by
pressing down on the two brakes provided on the caster
wheels (see Fig. 11). To unlock, press upward on the
brakes.
5. Adjusting Tension on Carrier Rotation
If any optional accessories are added to the microscope,
the tension on the carrier rotation must be adjusted to
compensate for the added weight by completing the
steps below.
A. Unscrew the black cap (see 1 in Fig. 12).
B. Use a 19 mm wrench to turn the screw (see 2
in Fig. 12) to achieve the desired tension.
C. Once the desired tension is achieved, screw
on the black cap (see 1 in Fig. 12).
Fig 10
Fig 11
Fig 12
B A
2
1