Labomed eVA 500, Руководство пользователя

Страница: 28 / 33

User’s Manual eVA 500 / 500D COLPOSCOPE
27
Issue 1.0
6169000 ‐ 795 eVO 500/500D Printed on May, 2013
12. CARE & MAINTENANCE (Fig. 11)
This instrument is a high grade technological product and not required any special
periodicalmaintenance if handed carefully. To ensure optimum performance and safe
working order of the instruments, its safety must be checked once every 12months. We
recommended having this check performance by our service representative as part of
regular maintenance work.If a failure occurs which you cannot correct using the trouble-
shooting table, attach a sign to the instrument stating out of order and contact our
service representative for servicing part or circuit diagram etc
• Care instructions:
o
Keep accessories away from dust when not in use, e.g. protect them from dust cover.
o
Remove dust with a pneumatic rubber bulb and soft brush.
o
Use special optics cleaning cloths and pure alcohol for cleaning lenses and eyepieces.
o
Protect your colposcope from moister, fumes, acids and cosmetic materials. Do not store
chemicals close to the instrument.
o
Protect it from improper handling. Never install other devices sockets or unscrew optical
system and mechanical parts unless explicitly instructed to do so in this manual.
o
Protect the microscope from oil and grease. Never oil or grease the guide surfaces or
mechanical parts.
o
Remove coarse contamination using a damp disposable cloth.
o
Use disinfectants based on the following ingredients: aldehydes, alcohols, quaternary
ammonium compounds.
o
Camera: Keep optical components clean using a lint-free cloth. Soak the cloth using a
little methanol or glass cleaner. Do not use ethanol and spirit.
o
Do not clean products with optical components in a cleaning/disinfecting device or ultra
sound bath.
o
LABOMED MaxLite coatings are very resistant. If you clean as described above, the
coatings will not be damaged.
• Tropical environment/fungus:
LABOMED employs certain safety precaution in its manufacturing techniques and
materials. Other preventive measures include:
o
Keep optical part clean.
o
Use and store them in a clean environment only.
o
Store under UV light when not in use.
o
Use in continuously climate-controlled rooms only.
o
Keep moister away and cover using a plastic cover filled with silica gel.