background image

7

 SL 20i 

INTRODUCTION

8126700-795 

 SL 20i 

Issue 1.0

Printed on June,2019

Congratulations on your purchase of the SL 20i Slit Lamp.

This User Manual is designed as a training and reference manual for the Installation operation and 
maintenance of the instrument. We recommend that you read it carefully prior to use and follow the 
instructions to  ensure optimum performance of your new instrument. Properly trained eye care profes-
sionals such as ophthalmologists, optometrists, opticians and eye care technicians should operate this
instrument. 

Please retain this manual for future reference and to share with other users. Additional copies can be 
obtained from your authorized LABOMED dealer or from the LABOMED Customer Service Department at:

                          Tel: (510) 445-1257
                          Fax: (510) 991-9862
                          Email: [email protected]

INDICATIONS FOR USE

The SL 20i Slit Lamp is an AC-powered slit lamp biomicroscope that is intended for use in examining
the anterior segment, from the corneal epithelium to the posterior capsule. It is used to aid in the diagno-
sis of diseases or trauma, which affect the structural properties of the anterior segment of the eye.

CONTRAINDICATIONS

None.

Содержание 8126700-795



























Отзывы: