Labomed 6129000-795 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 67

background image

Magna

MAGNA

CARE AND MAINTENANCE

6129000-795

Issue 1.7

Printed on May,2020

49

CARE INSTRUCTIONS

1. Keep accessories away from dust when not in use, e.g. protect them with dust cover.
2. Remove dust with a pneumatic rubber blower and soft brush.
3. Protect your microscope from moisture, fumes, acids and cosmetic materials. Do not store chemical
close to the instrument.
4. Protect it from improper handling. Never install other devices sockets or unscrew optical system
and mechanical parts unless explicitly instructed to do so in this manual.
5. Protect the microscope from oil and grease. Never oil or grease the guide surfaces or mechanical
parts.
6. Remove coarse contamination using a damp disposable cloth.
7. Use disinfectants based on the following ingredients: aldehyde's, alcohols, quaternary ammonium
compounds.
8. Use special optics cleaning cloths and pure alcohol for cleaning lenses and eyepieces.
9. Clean optical components using a lint-free cloth. Soak the cloth using a little methanol or Glass cleaner.
Do not use ethanol and spirit.
10. Do not clean products and optical components in a cleaning/disinfecting devices or ultra sound bath.
11.

LABOMED Max Lite

coating are fungal resistant. If you clean as described above, the coatings

will not be damaged.
12. If cleaning and disinfection is done as described above there is no impact of multiple cleaning/
Disinfection on mechanical and optical parts. Paints & Coating are rigid and life long.

TROPICAL ENVIRONMENT / FUNGUS

LABOMED

employs certain safety precaution in its manufacturing techniques and materials. Other preven-

tive measures include:

•

Keep optical parts clean.

•

Use and store them in a clean, cool and dry environment only.

•

Keep moisture away using silica gel and dust cover.

OCCUPATIONAL SAFETY AND HEALTH PROTECTION

•

Observe work safety and health protection of persons responsible for processing contaminated products.

•

Current regulations of hospital hygiene and prevention of infection must be observed in the prepara-

tion, cleaning and disinfection of the products.

INSTRUCTIONS WORKPLACE

•

Remove surface contamination with a paper towel.

AUTOCLAVING

The rubber caps, sleeves and grips supplied by labomed are recommend for the following program for
autoclaving:

•

Temperature: 134˚C

•

Time: 10 minutes

•

Instrument: Standard Autoclave

«
...
50
51
52
53
54
...
»

Содержание 6129000-795




































































Отзывы:

Нет отзывов

Похожие инструкции для 6129000-795

Бренд: CAB Страницы: 13

Бренд: CAB Страницы: 30

Бренд: CAB Страницы: 17

Бренд: CAB Страницы: 33

Camping Equipment

Бренд: C. Crane Страницы: 8

Бренд: C-Pro Direct Страницы: 4

Бренд: C-Pro Direct Страницы: 4

Бренд: CAE Healthcare Страницы: 108

Бренд: Cannon Страницы: 36

Бренд: dbx Страницы: 2

Бренд: Eagle Group Страницы: 8

Бренд: Unitary products group Страницы: 28

Бренд: Palmako Страницы: 83

Бренд: natus Страницы: 20

Dantec Keypoint G4

Бренд: natus Страницы: 42

Бренд: natus Страницы: 149

Бренд: Rational Страницы: 60

Бренд: TANACOM Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды