Magna
MAGNA
14.4 CONTROL ELEMENTS
6129000-795
Issue 1.7
Printed on May,2020
A
B
C
D
E
H
F
40
Fig. 16
Fig. 16(a)
Fig. 15(a)
Fig. 15
1. ON / OFF SWITCH
The ON/OFF switch (A) is located at the back of the swivel arm. In
the ON position, a green LED (B) glows, and the cooling fan starts
running as shown in Fig. 15.
Set the intensity control knob (C) at the minimum intensity level
before switching the system on as shown in Fig. 15.
To preserve the life of the LED, turn off the instrument when the
microscope is not in use.
2. LIGHT INTENSITY CONTROL KNOB
The Light Intensity Control knob (D) is located at the front of the Auto
Balancing Arm (ARM). The brightness of the field of view can be
adjusted as desired using the intensity control knob as shown in Fig.
15(a).
3. AUTO BALANCING ARM (ABA) CONTROLS
a. Articulation of Auto Balancing Arm (ABA) can be handled
through two clutch release buttons located on left side (E)
and right side (F) of carrier arm as shown in Fig. 16.
b. Pressing and holding down of the clutch button can articulate
the Auto Balancing Arm (ABA) in any of the desired position.
Release of clutch button can lock the Auto Balancing Arm
in the desired position.
4. FILTER CHANGE KNOB
Refer Fig. 16(a)
Filter change lever is located in backside of Magnichanger Hous-
ing. Use lever H to change Filter Position.
