![background image](http://html2.mh-extra.com/html/labom/ci4-series/ci4-series_manual_3192519008.webp)
BA_072_2020-02_10.00 Pressure transmitter PASCAL Ci4
Page 8/28
6
User Manual
The device can be configured via the display module as well as the HART protocol. The
following pages describe operation and configuration of the device using the display mod-
ule. (valid from display module software version 2.0.0).
An overview of the menue structure can be found on the last page of this document.
6.1 Basics of the Operating Concept
The display module consists of a dot-matrix
display with 80x128 pixels as well as a
4-button control panel.
The four buttons below the display allow an
intuitive operation of the device. The gen-
eral functionality of the buttons is identical in
all operating modes.
Figure 7: Control elements
If you press and hold the up or down button, it will automatically be triggered multiple
times. This allows to easily navigate through longer selection lists. If you press and hold
the ESC button, you always return to the measured value display.
Button
Function
/
Select function, increase/decrease value
OK
Confirm selected function or selected value
ESC
Cancel action
ESC long
Return to measured value display
Table 1: General button functions
The structure of the display is the same in every operating mode. The display area is di-
vided into four zones:
Header
Icon indicating device status
Data area
Bar graph related to the currently measured value
Figure 8: Display structure