manualshive.com logo in svg

LaBina PL-1000 Mobil, Руководство по эксплуатации

Поделиться
Скачать
LaBina PL-1000 Mobil Скачать руководство пользователя страница 27

27

EN

PL-1000 Mobil

Checking equipment

E

  Carry out a visual check of the equipment:

-  Are there any signs of external damage (e.g. kinks in the handpiece cable, detached 

cap in the area of the cable connection)?

-  Are any cables disconnected?
-  Are the needle cartridge and needles aligned correctly? Are all needles fully with-

drawn into the needle cartridge ?

E

  Switch the handpiece on and carry out an acoustic check: Are operating noises or 

sounds prominent?

E

  In the event of anomalies, refer to chapters "10 Questions and problems" on page 33 

and "11 Guarantee" on page 34.

E

  If the device can no longer be operated harmlessly, take it out of service and contact an 

authorised dealer.

USE

Switching the control unit to operating mode or standby mode

To switch the controller to operating mode:

E

  Ensure that the power supply is established (see chapter "5.2 Connecting the power 

supply" on page 21).

  The 

Power 

 LED indicator illuminates white.

    The controller is in standby mode.

E

  Switch the controller on with the 

Device ON/OFF

 button on the rear of the controller.

  The 

Device ON/OFF

 button latches in.

    A short signal tone can be heard.
    The respective LED on the 

Select Handpiece I/II

 (   ) button illuminates white.

    The preset penetration frequency (100 Hz) appears on the display.

To switch the controller to standby mode:

E

  Press the 

Device ON/OFF

 button on the rear of the controller.

5.9

6

6.1

Содержание PL-1000 Mobil





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды