11
•
Enter the primary password
•
Enter the new service password, selecting a combination of 5 characters from the letters A-B-C-D.
•
You are prompted to repeat the new password, so enter again the previous combination
•
Enter the primary password
•
If the password entered is correct, “PASSWORD OK” is shown on the display for one second and
the system returns to the PASSWORD MANAGEMENT section.
•
Press the OFF button (F1) to disable user password usage.
To return to the general programming menu, press the EXIT button twice
From this moment, access to the ET-DSEL digital programmer as program selector is free.
HOW TO CHANGE THE SERVICE PASSWORD
•
Select “SERVICE PASSWORD”
•
Press OK (F1).
Press the EXIT
sbutton to return to general programming menu.
If the password entered does not match the previous one, the display shows PASSWORD ERROR, the system returns to the section
PASSWORD MANAGEMENT, and it is necessary to perform again the procedure.
ENABLING USER PASSWORD (primary and service password)
•
Select “PASSWORD ON / OFF”
•
Press OK (F1).
•
Press the ON button to enable user passwords and return
to the PASSWORD MANAGEMENT menu.
To return to the display of the programming menu, press the
EXIT button twice
From this moment on, whenever the user wants to access the ET-DSEL digital programmer to change the automatic door work program,
the primary or service password must be entered.
When the user decides to enable the password, it is recommended to change the combination of both primary and
service password.
DISABLING USER PASSWORD
•
From the PASSWORD MANAGEMENT section, select “PASSWORD ON / OFF”
•
Press the button OK (F1)
