Chapter 3: Getting Started
Product Service 1-800-522-7658
6
3' Cabinet Sizes
The 3' Cabinet is secured to the pallet using four transport brackets, two on each
side. To remove the brackets, do the following:
1.
Using the 1/2" wrenches, loosen and remove the bolts and locknuts that
secure the brackets to the pallet.
2.
Using a 1/2" wrench, loosen and remove the nuts and bolts securing the
transport brackets to the bottom of the cabinet.
3.
Discard the brackets, shipping nuts and bolts.
The cabinet is now ready to be removed from the pallet.
NOTE: A ramp has been provided attached to the wood pallet. Follow the
instructions on the face of the cabinet for safe removal.
After removing the cabinet from the pallet, carefully remove plastic wrapping
around the cabinet, and open the cabinet door. Locate the two transport brackets
attached to the face of the cabinet liner. Using a #2 Phillips screwdriver, remove
the screws securing the brackets, discard the brackets, and reinstall the screws.
4' & 5' Cabinet Sizes
The 4' & 5' Cabinets are secured to the pallet using four transport bolts securing
the cabinet to the pallet. To remove the bolts, do the following:
1.
Using the 1/2" wrench, loosen and remove the bolts that secure the cabinet
to the pallet.
2.
Discard the bolts and washers.
The cabinet is now ready to be removed from the pallet.
After removing the cabinet from the pallet, install the four Leveling Legs into the
bottom of the cabinet. Leveling Legs are located in the lower cabinet compartment.
Then, carefully remove the plastic wrapping around the cabinet, and open the
cabinet doors. Locate the two transport brackets attached to the face of the cabinet
liner. Using a #2 Phillips screwdriver, remove the screws securing the brackets,
discard the brackets, and reinstall the screws.
Moving the Cabinet
When moving the cabinet,
DO NOT PUSH ON THE FRONT OR BACK OF
THE UNIT
. Move the cabinet by pushing or pulling it sideways. This will
minimize the possibility of the unit overturning when in motion.
