16
Product Service Domestic 1-800-522-7658, International 816-333-8811
Chapter 3: Getting Started
Ground Wire
Attach one end of the included ground wire to the
stainless steel elbow on the drain tubing on the left side
of the Cold Trap.
When draining the CentriVap Cold
Trap always attach the other end of
the grounding clip to the solvent catch
pot to eliminate the risk of
electrostatic spark ignition.
Solvent Safety
Precautions
The CentriVap is not classified as
“explosion proof.” It has been
designed with safety as a primary
consideration
and should be used in a
prudent manner using “good
laboratory practices.” It has been
designed for use with compounds as
described in the United States
National Electrical Code Class I,
Group D. The heater may be
programmed to run as hot as 100°C,
however, the heater element may
normally run at 110°C. A thermal
fuse limits the heater to a maximum
temperature of 141°C. It is important
that the solvents used are compatible
with these temperatures. Do not
evaporate solvents that have an
autoignition temperature below
180°C. Do not evaporate solvents that
are classified as Group A, B, or C by
the National Electrical Code.
Evaporate only non-flammable or
Group D solvents with autoignition
temperatures 180°C or above. Use of
other compounds could cause an
explosion.
!!!!
!
Содержание CentriVap 74600-00
Страница 43: ...41 Product Service Domestic 1 800 522 7658 International 816 333 8811 Appendix A CentriVap Components...
Страница 45: ...43 Product Service Domestic 1 800 522 7658 International 816 333 8811 Appendix A CentriVap Components...
Страница 47: ...45 Product Service Domestic 1 800 522 7658 International 816 333 8811 Appendix A CentriVap Components...
Страница 63: ...63 Product Service Domestic 1 800 522 7658 International 816 333 8811...
