Labconco CentriVap 74600-00, Руководство пользователя

Страница: 32 / 63

28
Product Service Domestic 1-800-522-7658, International 816-333-8811
Chapter 5: Maintaining Your CentriVap
IF THE ICE HAS MELTED, THE
GLASS TRAP INSERT MUST BE
EMPTIED BEFORE THE COLD TRAP
IS STARTED AGAIN.
7. If the Glass Trap is used, check to see that the
ethanol in the stainless steel trap is free of ice or
water. Drain the ethanol and replace it with fresh
ethanol.
8. If the media in the optional clear canister has
changed color, discard and replace the insert with a
new insert. For the radiochemical trap insert, no
indicator exists; therefore, it should be discarded
after each use. In radioactive applications, the
system should be monitored with a Geiger counter.
Monthly:
1. The rubber components on the CentriVap may
eventually deteriorate and require replacement. The
effective life of rubber parts depends upon both
their usage and the surrounding environment.
Check all rubber hoses and gaskets and replace any
that show signs of hardening, permanent set or
deterioration.
2. Using a soft cloth, sponge or chamois and a mild,
non-abrasive soap or detergent, clean the glass lid.
3. Using a soft cloth, sponge, or chamois and a mild,
non-abrasive soap or detergent, clean the exterior
surfaces of the unit. Liquid spray cleaners and
polishes may be used on the exterior surfaces. Do
not use solvents to remove stains from the exterior
surfaces as they may damage the finish.
Annually:
1. Every 12 months, or more often, if the Cold Trap is
operated in a dusty environment, the refrigeration
system condenser of the Cold Trap should be
cleaned. Using a vacuum cleaner with brush
attachment, clean the condenser to ensure proper
airflow for peak performance.
☞