Lab.gruppen PDX3000 Скачать руководство пользователя страница 2

2

PDX3000

Quick Start Guide

3

Terminals marked with this symbol carry 

electrical current of sufficient magnitude 
to constitute risk of electric shock. 

Use only high-quality professional speaker cables with 
¼" TS or twist-locking plugs pre-installed. All other 
installation or modification should be performed only 
by qualified personnel.

This symbol, wherever it appears, 

alerts you to the presence of uninsulated 
dangerous voltage inside the 

enclosure - voltage that may be sufficient to constitute a 
risk of shock.

This symbol, wherever it appears, 

alerts you to important operating and 
maintenance instructions in the 

accompanying literature. Please read the manual.

Caution

To reduce the risk of electric shock, do not 
remove the top cover (or the rear section). 

No user serviceable parts inside. Refer servicing to 
qualified personnel.

Caution

To reduce the risk of fire or electric shock, 
do not expose this appliance to rain and 

moisture. The apparatus shall not be exposed to dripping 
or splashing liquids and no objects filled with liquids, 
such as vases, shall be placed on the apparatus.

Caution

These service instructions are for use 
by qualified service personnel only. 

To reduce the risk of electric shock do not perform any 
servicing other than that contained in the operation 
instructions. Repairs have to be performed by qualified 
service personnel.

1. 

Read these instructions.

2. 

Keep these instructions.

3. 

Heed all warnings.

4. 

Follow all instructions.

5. 

Do not use this apparatus near water.

6. 

Clean only with dry cloth.

7. 

Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions.

8. 

Do not install near any heat sources such as 

radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.

9. 

Do not defeat the safety purpose of the polarized 

or grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding-type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If the 
provided plug does not fit into your outlet, consult an 
electrician for replacement of the obsolete outlet.

10.  

Protect the power cord from being walked on or 

pinched particularly at plugs, convenience receptacles, 
and the point where they exit from the apparatus.

11.  

Use only attachments/accessories specified by 

the manufacturer.

12.  

Use only with the 

cart, stand, tripod, bracket, 
or table specified by the 
manufacturer, or sold with 
the apparatus. When a cart 
is used, use caution when 
moving the cart/apparatus 
combination to avoid 

injury from tip-over.

13.  

Unplug this apparatus during lightning storms or 

when unused for long periods of time. 

14.  

Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 
damaged in any way, such as power supply cord or plug 
is damaged, liquid has been spilled or objects have fallen 
into the apparatus, the apparatus has been exposed 
to rain or moisture, does not operate normally, or has 
been dropped.

15.  

The apparatus shall be connected to a MAINS socket 

outlet with a protective earthing connection.

16.  

Where the MAINS plug or an appliance coupler is 

used as the disconnect device, the disconnect device shall 
remain readily operable.

17.  

Correct disposal of this 

product: This symbol indicates that 
this product must not be disposed 
of with household waste, 
according to the WEEE Directive 
(2012/19/EU) and your national 
law. This product should be taken 

to a collection center licensed for the recycling of waste 
electrical and electronic equipment (EEE). The 
mishandling of this type of waste could have a possible 
negative impact on the environment and human health 
due to potentially hazardous substances that are generally 
associated with EEE. At the same time, your cooperation 
in the correct disposal of this product will contribute to 
the efficient use of natural resources. For more 
information about where you can take your waste 
equipment for recycling, please contact your local city 
office, or your household waste collection service.

18.  

Do not install in a confined space, such as a book 

case or similar unit.

19.  

Do not place naked flame sources, such as lighted 

candles, on the apparatus.

20.  

Please keep the environmental aspects of battery 

disposal in mind. Batteries must be disposed-of at a 
battery collection point.

21.  

Use this apparatus in tropical and/or 

moderate climates.

Music Tribe accepts no liability for any loss which 
may be suffered by any person who relies either 
wholly or in part upon any description, photograph, 
or statement contained herein. Technical specifications, 
appearances and other information are subject to 
change without notice. All trademarks are the property 
of their respective owners. Midas, Klark Teknik, 
Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, 
TC Helicon, Behringer, Bugera, Auratone and Coolaudio 
are trademarks or registered trademarks of Music Tribe 
Global Brands Ltd. © Music Tribe Global Brands Ltd. 
2019 All rights reserved.

For the applicable warranty terms and conditions 
and additional information regarding Music Tribe’s 
Limited Warranty, please see complete details online at 
musictribe.com/warranty. 

Zhongshan Eurotec Electronics Limited

No. 10 Wanmei Road, South China Modern Chinese 
Medicine Park, Nanlang Town, 528451, Zhongshan City, 
Guangdong Province, China

Important Safety 
Instructions

LEGAL DISCLAIMER

LIMITED WARRANTY

Las terminales marcadas con este símbolo 
transportan corriente eléctrica de 
magnitud suficiente como para constituir 

un riesgo de descarga eléctrica. Utilice solo cables de 
altavoz profesionales y de alta calidad con conectores 
TS de 6,3 mm o de bayoneta prefijados. Cualquier otra 
instalación o modificación debe ser realizada únicamente 
por un técnico cualificado.

Este símbolo, siempre que aparece, 
le advierte de la presencia de voltaje 
peligroso sin aislar dentro de la caja; 

este voltaje puede ser suficiente para constituir un riesgo 
de descarga.

Este símbolo, siempre que aparece, 
le advierte sobre instrucciones operativas 
y de mantenimiento que aparecen en la 

documentación adjunta. Por favor, lea el manual.

Atención

Para reducir el riesgo de descarga 
eléctrica, no quite la tapa (o la parte 

posterior). No hay piezas en el interior del equipo que 
puedan ser reparadas por el usuario. Si es necesario, 
póngase en contacto con personal cualificado.

Atención

Para reducir el riesgo de incendio o 
descarga eléctrica, no exponga este 

aparato a la lluvia, humedad o alguna otra fuente que 
pueda salpicar o derramar algún líquido sobre el aparato. 
No coloque ningún tipo de recipiente para líquidos sobre 
el aparato.

Atención

Las instrucciones de servicio deben 
llevarlas a cabo exclusivamente personal 

cualificado. Para evitar el riesgo de una descarga eléctrica, 
no realice reparaciones que no se encuentren descritas 
en el manual de operaciones. Las reparaciones deben ser 
realizadas exclusivamente por personal cualificado.

1. 

Lea las instrucciones.

2. 

Conserve estas instrucciones.

3. 

Preste atención a todas las advertencias.

4. 

Siga todas las instrucciones.

5. 

No use este aparato cerca del agua.

6. 

Limpie este aparato con un paño seco.

7. 

No bloquee las aberturas de ventilación. Instale el 

equipo de acuerdo con las instrucciones del fabricante.

8. 

No instale este equipo cerca de fuentes de calor 

tales como radiadores, acumuladores de calor, estufas u 
otros aparatos (incluyendo amplificadores) que puedan 
producir calor.

9. 

No elimine o deshabilite nunca la conexión a tierra 

del aparato o del cable de alimentación de corriente. 
Un enchufe polarizado tiene dos polos, uno de los cuales 
tiene un contacto más ancho que el otro. Una clavija con 
puesta a tierra dispone de tres contactos: dos polos y la 
puesta a tierra. El contacto ancho y el tercer contacto, 
respectivamente, son los que garantizan una mayor 
seguridad. Si el enchufe suministrado con el equipo no 
concuerda con la toma de corriente, consulte con un 
electricista para cambiar la toma de corriente obsoleta.

10. 

Coloque el cable de suministro de energía de manera 

que no pueda ser pisado y que esté protegido de objetos 
afilados. Asegúrese de que el cable de suministro de 
energía esté protegido, especialmente en la zona de la 
clavija y en el punto donde sale del aparato.

11. 

Use únicamente los dispositivos o accesorios 

especificados por el fabricante.

12.  

Use únicamente la 

carretilla, plataforma, 
trípode, soporte o mesa 
especificados por el 
fabricante o suministrados 
junto con el equipo. 
Al transportar el equipo, 
tenga cuidado para evitar 

daños y caídas al tropezar con algún obstáculo.

13.  

Desenchufe el equipo durante tormentas o si no va a 

utilizarlo durante un periodo largo.

14.  

Confíe las reparaciones únicamente a servicios 

técnicos cualificados. La unidad requiere mantenimiento 
siempre que haya sufrido algún daño, si el cable de 
suministro de energía o el enchufe presentaran daños, 
se hubiera derramado un líquido o hubieran caído objetos 
dentro del equipo, si el aparato hubiera estado expuesto 
a la humedad o la lluvia, si ha dejado de funcionar de 
manera normal o si ha sufrido algún golpe o caída.

15.  

Al conectar la unidad a la toma de corriente eléctrica 

asegúrese de que la conexión disponga de una unión 
a tierra.

16.  

Si el enchufe o conector de red sirve como único 

medio de desconexión, éste debe ser accesible fácilmente.

17.  

Cómo debe deshacerse de 

este aparato: Este símbolo indica 
que este aparato no debe ser 
tratado como basura orgánica, 
según lo indicado en la Directiva 
WEEE (2012/19/EU) y a las 
normativas aplicables en su país. 

En lugar de ello deberá llevarlo al punto limpio más 
cercano para el reciclaje de sus elementos eléctricos / 
electrónicos (EEE). Al hacer esto estará ayudando a 
prevenir las posibles consecuencias negativas para el 
medio ambiente y la salud que podrían ser provocadas por 
una gestión inadecuada de este tipo de aparatos. Además, 
el reciclaje de materiales ayudará a conservar los recursos 
naturales. Para más información acerca del reciclaje de 
este aparato, póngase en contacto con el Ayuntamiento 
de su ciudad o con el punto limpio local.

18.  

No instale esta unidad en un espacio muy reducido, 

tal como encastrada en una librería o similar.

19.  

No coloque objetos con llama, como una vela 

encendida, sobre este aparato.

20.  

Tenga presentes todas las advertencias relativas 

al reciclaje y correcta eliminación de las pilas. Las pilas 
deben ser siempre eliminadas en un punto limpio y nunca 
con el resto de la basura orgánica.

21.  

Use este aparato en rangos de temperatura 

moderados y/o tropicales.

Music Tribe no admite ningún tipo de responsabilidad 
por cualquier daño o pérdida que pudiera sufrir 
cualquier persona por confiar total o parcialmente en 
la descripciones, fotografías o afirmaciones contenidas 
en este documento. Las especificaciones técnicas, 
imágenes y otras informaciones contenidas en este 
documento están sujetas a modificaciones sin previo 
aviso. Todas las marcas comerciales que aparecen 
aquí son propiedad de sus respectivos dueños. Midas, 
Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, 
TC Electronic, TC Helicon, Behringer, Bugera, Auratone y 
Coolaudio son marcas comerciales o marcas registradas 
de Music Tribe Global Brands Ltd. © Music Tribe Global 
Brands Ltd. 2019 Reservados todos los derechos. 

Si quiere conocer los detalles y condiciones aplicables 
de la garantía así como información adicional sobre la 
Garantía limitada de Music Tribe, consulte online toda la 
información en la web musictribe.com/warranty.

Instrucciones de 
seguridad

NEGACIÓN LEGAL

GARANTÍA LIMITADA

Содержание PDX3000




























Отзывы: