Lab.gruppen D Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 58

background image

6. Installation

8

D SERIES Lake Operation Manual rev 3.0.4

6. Installation

8

D SERIES Lake Operation Manual rev

3

.0.

3

5.3.3. Other Documentation

This Operation Manual is intended to serve as a guide and reference to the operation and maintenance of the
D Series Lake hardware platform. Comprehensive information is given regarding installation, connection and
operation of the front panel interface.

D Series Lake amplifiers are designed for configuration and operation using the Lake Controller and CAFÉ software
programs. This manual includes a brief tutorial on how to put an amplifier into service using Lake Controller, and it
also includes an overview of some features that are implemented via CAFÉ.

For complete information on DSP configuration and operation using Lake Controller, please refer to the Lake
Controller Manual, available online at www.labgruppen.com/support.

For detailed information on configuration and operation of the power platform using CAFÉ, please refer to the guide
embedded in the software or to the CAFÉ Coach video series available on the Lab.gruppen YouTube channel or
via a link on the Lab.gruppen web site.

6. Installation

6.1. Unpacking

Carefully open the shipping carton and check for any damage to the device or the supplied accessories. Every
Lab.gruppen product is tested and inspected before leaving the factory and should arrive in perfect condition. If
any damage is discovered, please notify the shipping company immediately. Only the consignee may initiate a
claim with the carrier or their insurers for damage incurred during shipping. Save the carton and packing materials
for the carrier’s inspection.

6.1.1. Included in the box

In addition to the D Series device, the shipping carton includes the following items:

•  D Series Lake Quick Start Guide
•  AC mains lead (power cable) with Neutrik powerCON connector (D200, D120 and D80) or IEC connector
  (D40, D20 and D10) and AC socket plug according to ordering selection
•  Rear brackets for additional rear rack support (pair) along with associated mounting hardware
•  Connector kit including all needed connectors
•  Front grille and dust filter assembly

NOTE: Depending on the model, the connector kit might include more connectors than applicable for
the product you have. Select those connectors required for your unit and application.

Please keep the original carton and associated packaging to facilitate shipping of the device should the need arise.

«
...
6
7
8
9
10
...
»

Содержание D Series



























































Отзывы:

Нет отзывов

Похожие инструкции для D Series

Бренд: CABASSE Страницы: 2

Бренд: Canton Страницы: 132

Бренд: Vanguard Dynamics Страницы: 3

Бренд: Luxman Страницы: 20

Бренд: JBL Страницы: 28

Бренд: Texas Instruments Страницы: 8

Бренд: Audionet Страницы: 11

Бренд: Pyramid Страницы: 12

Бренд: Symetrix Страницы: 22

ZeroUno DAC-HPA

Бренд: Canever Страницы: 8

JBL Commercial VMA Series

Бренд: Harman Страницы: 28

Acoustasonic 30

Бренд: Fender Страницы: 16

Бренд: Eden Страницы: 7

Бренд: Carver Страницы: 19

Tone Blaster Xtreme TBX15R

Бренд: Ibanez Страницы: 60

Бренд: Wilson Electronics Страницы: 12

Бренд: Sonosax Страницы: 19

Бренд: Harman Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды