Lab.gruppen C Series C 10 4X, Руководство по эксплуатации, Страница: 29 / 33

C Series C 20:8X, C 10:8X, C 10:4X and C 5:4X Operation Manual
29
APPENDIX 8
C 10:4X
Level Load Rated power Line Current *2) Watt *1) Thermal dissipation
120 VAC 230 VAC In Out Dissipated BTU/hr kCal/hr
Standby w. remote Power Off via NomadLink 6 0 6 20 5
Power On, Idling 91 0 91 312 79
Amp Watt
Pink noise
(1/8)
70 V / Ch. 250 x4 2,7 1,4 274 125 149 509 128
16 Ω / Ch. 250 x4
2,5 1,3 252 125 127 432 109
32 Ω / Bridged 500 x2
100 V / Ch.
250 x4
2,0 1,0 225 125 100 341 86
500 x2
8 Ω / Ch. 500 x2
2,1 1,1 217 125 92 314 79
16 Ω / Bridged
4 Ω / Ch. 250 x4
2,3 1,2 230 125 105 359 90
8 Ω / Bridged 500 x2
2 Ω / Ch. 125 x4
1,3 0,7 136 63 73 249 63
4 Ω / Bridged 250 x2
Pink noise
(1/4) 70 V / Ch. 250 x4 4,9 2,6 526 250 276 942 237
16 Ω / Ch. 250 x4
4,3 2,2 458 250 208 710 179
32 Ω / Bridged 500 x2
100 V / Ch. 500 x2 3,3 1,7 384 250 134 456 115
8 Ω / Ch. 250 x4
3,5 1,8 364 250 114 388 98
16 Ω / Bridged 500 x2
4 Ω / Ch. 250 x4
3,6 1,9 373 250 123 421 106
8 Ω / Bridged 500 x2
2 Ω / Ch. 125 x4
2,2 1,1 219 125 94 321 81
4 Ω / Bridged 250 x2
*1) The amplifier’s PSU operates as a non-resistive load, so the calculation “Volts x Amps = Watts” would not be correct. Instead, measured and
specified here is what is known as the “Active Power” in the amplifier providing useful, real-world values of power consumption and heat dissipation.
*2) Current draw figures measured at 230 V. 115 V figures are 230 V figures multiplied by two.
C 5:4X
Level Load Rated power Line Current *2) Watt *1) Thermal dissipation
120 VAC 230 VAC In Out Dissipated BTU/hr kCal/hr
Standby w. remote Power Off via NomadLink 6 0 6 20 5
Power On, Idling 91 0 91 312 79
Amp Watt
Pink noise
(1/8) 70 V / Ch. 125 x4 1,7 0,9 176 63 114 387 98
16 Ω / Ch. 125 x4 1,5 0,8 156 63 94 319 80
32 Ω / Bridged 250 x2
100 V / Ch. 250 x2 1,4 0,7 152 63 89 305 77
8 Ω / Ch. 125 x4 1,3 0,7 134 63 72 244 62
16 Ω / Bridged 250 x2
4 Ω / Ch. 125 x4 1,3 0,7 131 63 68 233 59
8 Ω / Bridged 250 x2
2 Ω / Ch. 63 x4 0,9 0,5 94 32 62 213 54
4 Ω / Bridged 126 x2
Pink noise
(1/4) 70 V / Ch. 125 x4 3,0 1,6 330 125 205 700 176
16 Ω / Ch. 125 x4 2,4 1,3 265 125 140 476 120
32 Ω / Bridged 250 x2
100 V / Ch. 250 x2 2,3 1,2 252 125 127 433 109
8 Ω / Ch. 125 x4 2,0 1,1 222 125 97 331 83
16 Ω / Bridged 250 x2
4 Ω / Ch. 125 x4 2,1 1,1 228 125 103 350 88
8 Ω / Bridged 250 x2
2 Ω / Ch. 63 x4 1,3 0,7 139 63 76 260 65
4 Ω / Bridged 126 x2
*1) The amplifier’s PSU operates as a non-resistive load, so the calculation “Volts x Amps = Watts” would not be correct. Instead, measured and
specified here is what is known as the “Active Power” in the amplifier providing useful, real-world values of power consumption and heat dissipation.
*2) Current draw figures measured at 230 V. 115 V figures are 230 V figures multiplied by two.