１４
The power connection procedures are as follows:
1)
Before connecting the power cord, make sure that the main power switch is turned off.
2)
Plug the power cords into the power sockets
at the back of this equipment.
3)
Plug the other end into a properly grounded and dedicated power outlet nearby.
3.6 Operating Conditions
This equipment is designed for indoor use in laboratory environments and to be operated
only by properly trained staff knowledgeable in safe laboratory practices.
The operating conditions for this equipment are as follows:
Permissible Ambient Temperature
18 to 30
℃
(
64.4
to 86
°
F)
Permissible Relative Humidity
up to 80%
Permissible Altitude
0 to 2,000 m (6,562 ft)
3.7 Required Checking before Operation
⚫
Check whether the equipment is installed on a flat, stable, clean, non-slip, dry, and
fireproof surface inside a lab with proper safety measures.
⚫
Check whether the equipment is level and fixed properly by the rubber feet.
⚫
Check whether the minimum distance (30 cm) from any other devices is observed.
⚫
Check whether any device which can be affected by the motor vibrations is placed
near this unit.
