13
2)
Turn all 4 height adjustment handles counter-clockwise until the rubber feet touch the
ground.
3)
Then, turn all 4 height adjustment handles about 90
o
degree more so that the caster is
about 10 mm(0.39
”
) above the ground as shown below:
4)
Check whether the equipment is level side-to-side as well as front-to-back by placing a
bubble level on top of the equipment.
5)
If not, adjust the height of the rubber foot appropriately until the equipment is level.
3.5 Power Connection
⚫
Check electrical requirements in the operation manual or on the ID plate attached
to the top of this equipment before use.
⚫
Make sure to use the power cord that comes with your equipment.
⚫
In order to prevent fire or power cord damage due to overloading, do not use power
strips or improper extension cords.