Page 36 of 72
36
Configuring the Gateway
LAARS ProtoNode Start-up Guide
36
•
To add an active profile to support a device, click the Add button under the Active Profiles heading.
This will present a profile drop-down menu underneath the Current profile column.
•
Once the Profile for the device has been selected from the drop-down list, enter the value of the
device’s Node
-ID which was assigned in
Section
2.3.2
.
•
Then press t
he “Submit” button to add the Profile to the list of devices to be configured.
•
Repeat this process until all the devices have been added.
•
Completed additions are liste
d under “Active profiles” as shown in
Figure 39
.
8.4
Verify Device Communications
•
Check that the port R1 TX1 and RX1 LEDs are rapidly flashing
. See
Section
9.4
for additional
LED information and images.
•
Confirm the software shows good communications without errors (
Section
9.2
).
Figure 39: Web Configurator Showing Active Profile Additions
LAARS Heating Systems
20
Industrial Way, Rochester, NH, USA 03867
•
(800) 900-9276
•
www.Laars.com
