MANUAL FOR USE AND MAINTENANCE
LSC 001 -UK- REV. 06
19
To enter the setting menu for the day of the week, time and date, proceed as follows:
1. Press and hold down the buttons
and
for 5 seconds, until the display reads
““““““A XXXX””””,
where the symbol
is flashing and the symbols “
XXXX” refer to the current year (NOTE. Pressing
the two buttons will show the current time of day).
2. Change the setting, if necessary, using the buttons
and
and press the button
to
confirm.
3. The display will indicate “b XX”, where “XX” indicates the set month. Change the setting, if necessary,
using the buttons
and
and press the button
to confirm.
4. The display will indicate “c XX”, where “XX” indicates the set month. Change the setting, if necessary,
using the buttons
and
and press the button
to confirm.
5. The display will indicate “DAY X”, where “X” indicates the number of the set day (1 = Monday 2=Tuesday,
etc.). Change the setting, if necessary, using the buttons
and
and press the button
to
confirm.
6. The display will indicate “d XX:YY”, where “XX” indicates the hour and “YY” the minutes. Change the
setting, if necessary, first the flashing “
XX” using the buttons
and
and confirming with the
button
,then change the flashing “
YY” using the buttons
and
and confirming with the
button
, the main view status on the display will then be automatically restored.
PREPARING COFFEE
a) Remove a filter holder (11/a or 11/b according to whether it is for 1 or 2 cups of coffee) from the delivery
group (16).
b) Fill it with ground coffee, taking care not to leave any coffee powder on the top edge of the filter holder.
Press down the coffee with the special manual coffee tamper provided.
c) Firmly re-attach the filter holder to the group, without tightening it excessively.
d) Place one or two cups below the filter holder (according to whether it is for 1 or 2 cups of coffee).
e) Press one of the coffee delivery buttons (25-26-27-28) corresponding to preset doses or otherwise use
the “ON/OFF” button (29) for manual delivery.
NOTE. To stop coffee delivery earlier after using one of the buttons with pre-set doses, just press
the button (29) on the same touchpad.
STEAM DELIVERY FOR HOT DRINK PREPARATION
a) Insert the steam wand (8) into the pitcher containing the drink to be heated up.
b) Turn the knob (5) of the corresponding steam wand (8) anti-clockwise. Set the amount of steam as
needed by turning the knob (5) more or less.
c) At the end of the heating phase, turn the knob (5) clockwise, remove the steam wand from the pitcher
and clean it immediately with a wet sponge, removing all residues of the heated drink.
WARNING!
Do not turn the steam knob (5) before inserting the steam wand (8) into the pitcher, in order to
prevent possible burns.
