La San Marco NEW 105 T 2, Использование и обслуживание

Страница: 66 / 172

En
G
li
SH
65
K5GRx
PRESS KEY > 5 seconds
The display shows
Doses setting
Select within30s

Within 30 seconds (time-out to quit the programming phase), press any of the keys combined with the 4
doses which can be programmed (for example K1GRx). The LeDs will always stay on. The LeD relating to
the key being programmed will flash until the dynamic programming is complete.
K1GRx

When the quantity of coffee with which the dose is to be programmed is achieved, press the key being
programmed to interrupt product dispensing with the consequent de-energising of eVx + PUMP. The new
value of the espresso dose is stored in eePROM in pulses of the volumetric meter.
K1GRx
EVx + PUMP = oFF
•
to proceed with programming the remaining coffee doses (if the programming time-out of 30 sec-
onds is not exceeded), repeat in sequence points

and

.
•
if the time-out (30 seconds) is triggered during the programming phase, to proceed with its perfor-
mance, you will need to repeat the entire sequence described in points

,

and

.
iMPoRtant: the programming made on the FiRSt Unit is not automatically transferred to all the
other units. to copy the doses onto the other units, press the related continuous keys. this does not
however affect the possibility of programming the remaining units independently from the first via
the operations described in points

,

and

.
If the “prebrewing” function is active (see dedicated paragraphs), the dosage in programming
phase still enables this particular function. therefore wait for it to have ended before stopping the
dispensing in progress.
Note:
During the programming of a unit, the other units remain disabled, along with the tea and steam.
IF A COFFee DOSe IS NO LONGeR ACTIVATeD …
Possible troubleshooting: