LA NORDICA TermoRosa Ready D.S.A, Руководство пользователя

Страница: 22 / 68

ENGLIsH
VARNISHED PRODUCTS (If present)
After some years of product use a change in the varnished details colour is totally normal. This is due to the considerable temperature
range the product is subject to whenever in use and to the varnish ageing of time passing by.
ATTENTION : before any possible application of the new varnish, do clean and remove all the traces from the surface which has to
be varnished.
ENAMELLED PRODUCTS (If present)
For the cleaning of enamelled surfaces use soap water or not aggressive and not chemically abrasive detergents.

After the cleaning
do NOT
let soapy water or any cleanser dry but remove them immediately.
DO NOT use sandpaper or steel wool .
CHROMIUM-COMPONENTS (If present)
If the components become bluish due to overheating, this can be solved with a suitable product for cleaning. DO NOT use abrasives
or solvents.
LATERAL HANDRAIL (If present)
The handles, the handrail and the tank water (cookers) should be cleaned to cold with a soft cloth and alcohol . DO NOT use
abrasives or solvents.
CLEANING OF THE HEARTH GRATE
IMPORTANT : if for whatever reason the grill is removed from the furnace, take care to reassemble it with the wider part of the slit
facing downwards (See
Picture 8
). This is to aid furnace cleaning.
CAST IRON COOKING PLATE AND RINGS

IMPORTANT: to avoid rust DO NOT forget
pots or pans on the cold cooking plate. This would create rust rings, unpleasant
to see and difficult to remove.
The cast iron cooking plate and the cast iron rings needs to be periodically cleaned by using sandpaper (grain 150) without
touching the enamelled parts . .
To carry out the cleaning operation remove the smoke outlet spigot and the smoke pipe. The smoke compartment can be cleaned
from the front side of the oven (see chap. CLEANING SMOKE COMPARTMENT COOKERS) or from the top. In this case remove the
cast iron rings and the cooking plate, as well the smoke outlet spigot and the smoke pipe. The cleaning can be carried out by using
a brush and a hoover.
(Where existing STANLESS STEEL frame ) Once you have placed the cast iron cooking plate, make sure to have always 3 mm in-
between the cooking plate and the STAINLESS STEEL frame. This gap is important because of the thermal expansions and to
avoid chromatic changes of the STAINLESS STEEL frame when hot.
ATTENTION: once the cleaning operations are terminated all the parts have to be re-assembled hermetically.
MAINTENANCE OF THE OVEN (where existing)
To avoid the possible forming of rust it is recommended:
- To let the steam getting out of the oven to reduce the formation of any condensation by opening the door briefly and carefully (1
or 2 times, or more often in case of cooking food very humid and with longer cooking times);
- Remove the food from the oven once cooked. Letting the food to chill in the oven at a temperature below 150 °C results in the
forming of condensation;
- After cooking, leave the oven door partially open to dry out any condensation;
- In case humidity formed inside the oven, we suggest you to treat with neutral vaseline the inside part of the cast iron door (where
existing).
- Repeat the treatment with the neutral vaseline on the inside part of the cast iron door every 3-6 months, depending of the
frequency of the use of the oven;
- In case of presence of rust on the inside part of the cast iron door, remove the rust by using abrasive material and then treat the
cast iron surface with neutral vaseline.
In order to ensure the quality of the foods that are cooked in the oven, the internal parts of the cast iron doors have NOT been treated
with any product.
CLEANING OF THE TemoCOOKING COLLECTION CASING through the oven
The smokes collection casing can be cleaned either through the oven ( Picture 9 ) the cooker or from the top.
It will be necessary to carefully clean the exchange surfaces removing the movable part of the hob and scraping the exchange
surfaces of the furnace and the pipes which compose the tube bundle located above the oven, as well as the downward passage of
the smoke on the right side of the oven. Later clean the smoke passage under the oven. Cleaning can be made with a brush and a
vacuum cleaner.
IMPORTANT : please verify that the deflectors are set as indicated in the Picture.
Pay ATTENTION that after cleaning all dismounted parts are reinstalled hermetically.
22