38
EN
Display
Operating Procedure
Description
“Barista” Programming
93.5
1
When the espresso machine is turned on, press and hold the the button T3 to access “Barista” programming.
After about 5 seconds the following screen will be displayed.
PrG
2
In order to program coffee brewing time, press the dose button to start and then press it again to stop when
the desired dose is achieved.
The button you pressed lights up steadily when programming is completed.
This operation must be repeated for each dose button you want to set. Buttons can be programmed in any
sequence.
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each Selection Indicator.
• Once programmed, Selection Indicator
remains lighted.
Program Dose
PrG
